50W LED Motion Sensor Security Floodlight in Cool White 4000K

This is a premium high quality (unlike others on the market that are budget versions) low energy ultra slimline SMD LED PIR motion sensor outdoor floodlight. This 50W LED floodlight gives a bright daylight White light. These LED floodlights are also instantly bright with no warm up time just like a standard halogen floodlight.

These make ideal replacements for 500W halogen motion sensor / detector floodlights.

This floodlight produces 4250 Lumens of light (the higher the lumens the brighter a light).

For our full range of low energy LED floodlights please Click Here

Premium Quality Aluminium Alloy body
Corrosion Resistant
No Flickering
No UV Radiation
High Quality LED Chips
Widely used for Lighting Driveways,Gardens & Buildings, Commercial Bill,Boards & Hoardings, Plazas,Sports Grounds & Parking Lots

Specifications:

Fitting Colour: Black
Fitting Material: Premium Quality Diecast Aluminium
LED Emitter: SMD LED (SMD 2835)
Dimensions: 237mm (L), 251mm (H)
Light Colour: Natural White (4000K / 840)
Voltage: 220-240V (50/60Hz)
Lumens: 4250LM
Beam Angle: 100°
Working Temperature: -20° to 45° C
Power Consumption: 50 Watt (250W Halogen Floodlight Equiv - others advertise 4250 lumens or less lamps as 500W)
Power Factor: >90
IP Rating: IP44
Average Life: 20,000 Hours
Weight: 1.3 Kg
Safety Approved: CE / RoHS
Guarantee: 2 Year Manufactures Guarantee
Product Code: VT-4955 / 5838

No UV or IR Radiation

Please click here for the product brochure.

These VT-4955 / 5838 LED floodlights come with 30cm of cable fitted to the fitting and do not have an overide function so will only turn on when motion is detected.

We strongly advise that any electrical work be carried out by a qualified electrician.

If you require a cable connector to add this floodlight to an existing cable or to lengthen the current cable we recommend the following: Please Click Here.

All our LED floodlight range are factory sealed units and as such should not be opened as they do not contain any user replaceable components. Any attempt to open the units will void the warranty / guarantee.

NOTE – To comply with regulations, installation must be carried out by a suitably qualified competent person and in accordance with the current IEE Wiring Regulations (BS7671) and Building Regulations. A copy of the instructions must be left for the user/maintenance engineer for future reference.