This unique 20w (100 watts plus) Edison Screw / E27 / ES  2 part CFL lamp design minimises waste as the electonic adpator in the base will last for at least 3 tubes. The tube connects by two pins into the adaptor and there is a simple to operate locking ring to hold the tube and adaptor (Do not hold the glass tube though whilst unlocking or locking a new tube). Tube and adaptor comes already assembled.

• Save energy up to 80% comparing with incandescent lamps.
• Long Life of 10000h, 10 times longer than incandescent lamp.
• Amalgam technology to achieve premium performance and minimum Hg content (2mg).
• High efficient tri-phosphor coating with excellent color rendering.
• Not dimmable.

These low energy bulbs also start up quicker than standard energy savers.

Specification:
Wattage : 20 Watt
Equivalent to : Approx 100 Watts Plus
Light Colour : Cool White / 840 / 4000K
Lumens : 1200 lm
Average Life : 10,000 hours / 10 Years
Energy Rating: 'A' Rated
Lamp base: E27 (ES / Edison Screw)
Height : 12.5cm / 125mm
Width : 4.5cm / 45mm
Time to 60% light output: Average of 20 seconds


NB: These light bulbs are not suitable for dimming switches.

Please only use these lamps in fittings that are rated to take a 100W or higher light bulb.

This lamp is recommended for use with fittings allowing free air flow. When used with enclosed fittings or fittings with restricted air flow, the life of the lamp may be significantly reduced, please only use in fittings that are open at both ends. If in doubt please contact us as we can advise what are the best light bulbs / lamps for your fitting.

Please click here for the product brochure.

The following replacement spirals are designed for these 20w lamps - Click Here